A31003-H8100-J100-01-7631, 09/2021
OpenScape Branch 550 / 550 HA, Installation Guide
9
Part Number
Part Description
F31505-E21-A1
F31505-E21-A2
F31505-E21-A3
F31505-E21-A4
F31505-E21-A6
F31505-E21-A7
F31505-E21-A101
F31505-E21-A102
F31505-E21-A103
F31505-E21-A104
F31505-E21-A106
F31505-E21-A107
Shipment, Packaging and Unpacking
The OpenScape Branch 550 / 550 HA is packed together with all standard parts in a
product specific cardboard packaging with suitable shock absorbers inside.
Each item is packaged separately.
NOTE: Please refer to 1.5.3 Special Handling and Unpacking Instructions.
1.4
Security Information
Refer to the OpenScape Branch 550/550 HA Security Checklist for the measures to be
taken to secure OpenScape Branches.
It is of vital importance that security measures outlined in the Security
Checklist are executed.
1.5
Safety Information
Read and observe the instructions within this chapter that have been
compiled for the operator’s safety and to ensure accordance with regulations. If the
following General Safety Instructions are not observed, it could lead to injuries to the
operator and/or damage to the product. Unify Software and Solutions GmbH & Co. KG
is exempt from accident liability, also during the warranty period if the instructions
within this guide are not observed.
General Safety
The product has been built and tested according to the basic safety requirements for
low voltage (LVD) applications and has left the manufacturer in a safety-related,
flawless condition. To maintain this condition and to ensure safe operation, the
operator must observe the correct operating conditions for the product and following
general safety instructions:
•
The product must be used as specified in the instructions for safety for the product
and for the operator, as described within this guide. The guide contains guidelines
for setting up, assembly, installation, maintenance, transport and storage.
•
The on-site electrical installation must meet the requirements of the country's
specific local regulations.
•
The communication system should only be operated with outlets that have
connected ground contacts.
