User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 86 -
COM property: this is to represent the working parameter of the Serial port including: Serial port type, baud
rate, data bit, stop bit, parity bit, data packet delimiter and flow control, etc.
Locate
The user can apply this function to locate a device when its IP address is known, but its position is unknown.
If you locate the device, it will beep. Users can locate the device by selecting the Configuration submenu
Locate
or clicking the
Locate
button on the toolbar.
Reset
The device should be restarted after a successful modification of parameter configuration. Users can also
carry out a restart through the submenu option
Reset
.
Import Setting
If a network has a large number of devices which are used for a same purpose, it would be very complicated
to carry out the parameter configuration for each device in the network one by one. Users can import the
parameter configuration from a parameter file directly into all the devices in the network through the
submenu option
Import setting
or by clicking the
Import setting
button on the toolbar. The dialog of import
parameter settings is shown below.
