Industrial Managed
Ethernet Switch
User Manual
錯誤
!
使用
[
常用
]
索
引標籤將
Heading
1,Product Manual
套用到您想要在此處
顯示的文字。
Page
175
of
191
5
Device Management Utility
Atop also provides a software utility called
Device Management Utility
to assist the users in configuring the product
.
The Device Management Utility was formerly called Device View or Serial Manager
.
The latest Device Management
Utility is version 5
.
20
.
This chapter will describe how to use the Device Management Utility with the EH75XX
industrial managed switch
.
After installing the utility software on your PC
.
Please click on the Device Management
Utility
’s icon to start the program
Figure 5.1 illustrates the GUI of the Device Management Utility
.
Figure 5.1 Device Management Utility
If the managed switch is on the same subnet as the PC that runs the Device Management Utility, the users should
be able to find the switch on the list of the device as shown in Figure 5.1
If for some reason, it cannot be found, the
user can click the first icon called
Rescan
on the icon bar to search for the device connected to the same subnet
as the Device Management Utility
Figure 5.2 Depicts the Search icon
.
Figure 5.2 Rescan (Search) Icon
To perform any task on the desired device, please click to select the entry of that particular device on the list inside
the window of Device Management Utility
.
Typically, when the users double
-
click the entry, the Device Management
Utility will connect to the switch and perform a login process
.
It is strongly recommended the users to setup the administration password for the managed switch for network
security purpose
.
If no administration password is set, the Device Management Utility will be able to login to and
change any configuration on the device
.
If the
Local Login Setting
was configured in Section 2.3.1, a login dialog will pop-up as shown in when the Device
Management Utility try to select the
Config by Browser
menu under the
Configuration
pulldown menu or click on
the fourth icon on the icon bar
.
The users then can enter the
User Name
and
Password
to verify the identity
.
Note
that the User Name is typically set to
“admin”
for convenient
.