User manual Version 1.0
ABLELink
Wireless Serial Server
SW2001
Copyright
©
2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
34 / 51
LINK1 Setup
1. Click on the
“
COM1
”
link and the following screen appears, you can configure SW2001 as
transparent mode by default. Configure SW2001 as TCP server and the local port is 4660, IP filter is
disabled by default, if IP filter is enabled, only source IP 10.0.29.11 can connect to SW2001.
Configure SW2001 as TCP client, the destination IP is 10.0.29.11, destination port is 4660.
Pair Connection
In the case of the serial connection is established with two or more SW2001 to send data over Ethernet
network, i.e. pair connection mode, you can choose
“
pair connection
”
which is indicated in the following
figure to cope with any type of serial device.
