User manual Version 1.1
SE5408/SE5416 Multi-port
Serial Server
Copyright © 2010 ATOP Technologies, Inc.
All rights reserved. Designed in Taiwan
- 30 -
Fig 28. Link State Information: Web Configuration
Time Settings
The Time Settings allow users to configure the system time of the device. The time can be manually
configured or automatically configured using NTP (Network Time Protocol). To automatically configure the
device time, an NTP server is needed for time synchronization. The examples of NTP server address are
time.stdtime.gov.tw (or 220.130.158.52) or time.nist.gov. Please contact your network administrator for the
IP address of your NTP server. Press “Save Configuration” before “Refreshing” the device current time
to make the changes be effective.
Fig 29. System NTP Setting: Web Configuration
Security Setting
The Security Setting allows users to configure the security of the device including the administrator or root
password, and the access control of the device configuration options. To change the administrator
password, fill in the “old” password, the new password, and the new password again in the “Verified
Password” field as shown in Fig 30. If you do not remember the “old” password, please reset the device
to the factory default setting as will be described later. The default administrator password is blank (no
entry).
In the “Security” section, you can enable or disable the administrator access using Web or Telnet console.
You may also select whether to apply the security function to LCM display or the Reset button. As shown
in Fig 31, the example shows both “Web Console” and “Telnet Console” are protected by password, while
LCM (setting) and the hardware “Reset Button” are not. In this case, one can view the system via the LCM
panel, and the hardware reset button can be used to reset the system to the default values.
