User manual Version 2.3
ABLELink
Serial-Ethernet Server
GW21W
3.3 Configuration set by hyper terminal console utility
1. Use a PC to connect to GW21W’s COM1 with RS-232 cross over cable.
(Please make sure COM1 is RS-232 type)
2. Open a hyper terminal program from your computer Start menu -> Programs -> Accessories ->
Communication -> hyper terminal, set COM1 parameters as follows.
-
Baud rate: 9600bps
-
Data bit: 8 bits
-
Parity: None
-
Stop bit: 1bit
-
Flow control: None
3. Power on GW21W
4. Wait the device finishing the initialize (Listen to the beeper sound).
5. Send the character ‘Z’ or ‘z’ three times within two seconds.
6. Once hyper terminal is connected, type in username and password then the following hyper terminal
window appears.
7. The following configuration operations are totally the same as those configure by Telnet.
8. After finishing console settings, restart GW21W.
Copyright © 2003 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
24/52
