53
Appendix
Aton CLT300 - Gig S455 / swisscom-en / Internet / appendix.fm / 23.04.2007
Warranty/Maintenance/Repair/
Authorisation
Warranty
The warranty period is 2 years as of the
date of purchase.
For warranty repair, the warranty card,
filled out and stamped by the place of pur-
chase must be included with the defective
device.
Excluded from the warranty are damages
due to improper use, wear and tear, or
tampering by others. The warranty does
not include consumed materials and defi-
ciencies which only affect the value or
capability for use inconsiderably.
In case of an error, please contact your
place of purchase.
Repair/Maintenance
Rental devices
If your phone does not operate properly,
notify Technical Assistance (phone
number 175).
The repair
*
and the fault action are free of
charge.
Purchased devices
Repair services are performed free of
charge within the warranty period in
accordance with the regulation of the
warranty certificate). If a repair is neces-
sary, the device must be returned to the
place of purchase.
If Technical Assistance is made available
(during the warranty period as well
**
),
the fault action is charged (route lump
sum price as well as time expenses). The
repair costs are additional outside the
warranty period.
Batteries
Battery cells are considered consumed
material, which is not covered by the war-
ranty service. Defective batteries are not
replaced free of charge. This applies to
rental and purchased devices.
You hear an error tone when keying an input
(a descending sequence of tones).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the operating
instructions if necessary.
You cannot listen to messages on the net-
work mailbox
.
Your phone system is set for pulse dialling.
¥
Set your phone system to tone dialling.
The calls list does not indicate a time for a
message.
Date/time are not set.
¥
Set the date/time (page 9).
The answering machine reports "PIN is incor-
rect" during remote operation.
1. System PIN entered is incorrect
¥
Repeat input of system PIN,
2. System PIN is still set to 0000.
¥
Change system PIN to a number other
than 0000 (page 49).
The answering machine does not record any
messages/has switched over to 'announce
only'.
Its memory is full.
¥
Delete old messages.
¥
Play back new messages and delete.
* except for damage to wearing parts (cables,
labels, batteries etc.) and damage arising
from incorrect handling such as dropping it
or allowing fluid to penetrate into handset
etc.
** except for damage to wearing parts (cables,
labels, batteries etc.) and damage arising
from incorrect handling such as dropping it
or allowing fluid to penetrate into handset
etc.
