41
Using several handsets
Aton CLT300 - Gig S455 / swisscom-en / Internet / registr_sett.fm / 23.04.2007
Using several handsets
Registering handsets
You can register up to a total of six hand-
sets on your base station.
An Aton CL300 handset can be registered
on up to four base stations.
Automatic registration to base station
Aton CLT300
Important
: The handset must not already
be registered to any base station.
Registering the handset to the
Aton CLT300 base station occurs automat-
ically.
¤
Place the handset in the base with its
display facing forward
.
Registration takes around 1 minute. Dur-
ing this process,
Regstr.Procedure
appears
in the display and the name of the base
station flashes e.g.
Base 1
. When the
handset has registered, its screen displays
its internal number, e.g.
INT 2
for internal
number 2. The handset is assigned the
lowest available internal number (1-6).
If all internal numbers 1-6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
Manual registration to base station
Aton CLT300
You must activate manual registration of
the handset at both the handset and the
base station.
After it has registered, the handset returns
to idle status. The internal number of the
handset appears in the display, e.g.
INT 1
.
If it does not, repeat the procedure.
On the handset
v
¢
Ð
¢
Handset
¢
Register H/Set
s
Select base station, e.g.
Base 1
and press
§OK§
.
~
Enter the system PIN of the
base station (the default is
0000) and press
§OK§
. The
screen will display, e.g.
Base
1
.
On the base station
Within 60 secs. press and
hold
the regis-
tration/paging key on the base station
(page 2) (approx. 3 secs.).
Registering other handsets
You can register other Aton CL300 hand-
sets and handsets for other devices with
GAP functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
¤
Press and
hold
the registration/paging
key on the base station (page 2)
(approx. 3 secs.).
De-registering handsets
You can de-register any registered hand-
set from any registered Aton CL300 hand-
set.
u
Open list of internal users.
The handset you are currently
using is indicated by
<
.
Notes:
– Automatic registration is not possible when
the base station on which you wish to reg-
ister the handset is being used to make a
call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset manu-
ally.
– You can change the name of the handset
