illegal operation and fall
Menu operating instruction
Once after every power on laser, the VERSION and MANUFACTURE INFORMATION will be sho-
wn in LCD monitor of rear panel. When laser is powered on, LCD monitor on rear panel shows the
current operating standalone mode or DMX address of DMX mode. With help of LCD control panel,
is very easy to set and change the operating mode of laser. After every resetting and saved, the
new mode information will be shown on LCD monitor at next power on.
Mode Option, to choose the operating mode of laser.
Confirmation, to store the current menu or confirm the current function
UP/DOWN, to change operating mode, parameter or DMX address.
SCAN-S(UN) SCAN-S(3D) Seven colors device menu chart
LED
Function
AUT
Auto show
SOU
Sound show
Note:
In sound model, device will close light in 3 seconds automatically, if there isn’t any
sound signal. Light on until sound signal received.
Atomic4Dj Laser 3D-S RGB –
www.Atomic4Dj.com
9
