AC Power
Please use the attached power, note that power voltage and frequency are the same as the mar-
ked voltage and frequency of device when connecting power. Every device’s power should be con-
nected separately, so that device can be controlled individually.
The power cord specification table:
Cable(EU) Cable(US)
Pin
Internatio-
nal
Brown
Black
Live
L
Liht blue
White
Neutral
N
Yellow/Gr
een
Yellow/Gr
een
Earth
Overhead Rigging
DMX Connection
Connection between laser lights and DMX must use the shied cable of diameter more than
0.5mm. Please use the attached 3 pin XLR plug/socket to connect the DMX output/input inter-
face. The connection between socket and cable as below( note the plug/socket’s 3 pin number
and position).
Note, XLR plug/socket’s 3pin can not be touched by inner hull, connection between pins is not
allowed. Except above connection, XLR plug/socket can not be connected with XLR control line.
Device receives international standard DMX512(1990) control signal.
When using standard DMX512 control signal, the last device’s output interface must be connec-
ted to a DMX plug. This plug is putting a 120 ohm resistance between “canon” plug’s 2 pin and 3
pin. Showing as below pic. Sticking this plug into the last device’s signal output interface, it will
avoid the interference during the process of signal transmission.
Atomic4Dj Laser 3D-S RGB –
www.Atomic4Dj.com
6
