FIGURE 2
6
STEP:2
Install End Leg Panels
(P7)
and Side Leg Panels
(P8)
onto the Legs using Bolts
(H1)
and Flat
Washers
(H2)
as shown in
FIGURE 2
Next, install Side Leg Support Board A
(P9)
and Side Leg Support Board B
(P10)
onto inside of
Side Leg Panels
(P8)
with Bolts
(H3)
and Flat Washers
(H2)
using Allen Wrench
(T1) as shown
in
DETAIL A
and
DETAIL B
.
Next, screw Side Leg Support Board A
(P9)
and Side Leg Support Board B
(P10)
to Air Hockey
Table Cabinet
(P1)
using Screws
(H4) as shown in
DETAIL A
and
DETAIL B
.
Do not strip out Screws(H4).
Tighten Bolts(H1) from Step 1 at this time.
PARTS REQUIRED:
H1
8 x 35mm Allen Head Bolt
16 pcs -
H4
4 x 45mm Philips Flat Head Screw
4 pcs -
P7
End Leg Panel
2 pcs -
P8
Side Leg Panel
2 pcs -
H2
8.5 x 22mm Flat Washer
20 pcs -
H3
8 X 28mm Allen Head Bolt
Side Leg Support Board A
Side Leg Support Board B
4 pcs -
P9
1 pc -
P10
1 pc -
H2
H3
H4
P10
H4
DETAIL B
DETAIL A
H1 H2
H3
H2
P7
P8
P9
P10
P7
P8
NOTE:Side Leg Support Board A(P9) and
Side Leg Support Board B(P10) must fit
inside of Side Leg Panels(P8)
NOTE:This Side Leg
Support Board will
straddle the Air
Blower Fan.
