Atomic COUPE & TRUCK, User Manual

Page: 22 / 67

21
Step 3 Plug in the cord to charge the vehicle.
■
Closing the charging cap
To close charging cap screw on the protective cap after charging, close the charging cap and lock it with the key.
■
Preparations for charging
□
1
Inspect the charger, charging cord, and tools for damage. If anything is damaged replace parts.
□
2
Ignition switch must be turn off.
□
3
Use only genuine replacement parts.
□
4
Check that all connections are secure.
□
5
The charging location must be well ventilated, dry and not in sunlight.
□
6
Turn on emergency shutoff switch.
□
7
Charging cord must be properly inserted and locked.
■ To charge
□
1
Power socket must be matched with charging machine’s plug.
□
2
Charging voltage is 120V.
□
3
Turn off ignition switch, shift to neutral, withdraw the key, engage parking brake and pull red emergency shutoff button.
□
4
Insert the plug into charging port and tighten. Indicator light on the instrument panel will illuminate in the following ways.
(*Prior to 2018) Red light flashing: Charging and batteries are below 80% capacity
Red and green flashing: Charging and the batteries are between 80% and 100% capacity.
Green light flashing: Batteries are fully charged.
(*After 2018) Red Light Solid = Charging
Green Light Solid = Full
Correct driving positon
Drive in the correct posture as shown below:
□
1 Sit upright in the seat.
□
2 Adjust the position of the seat forward or backward to ensure the pedals can be
reached and easily pressed.
□
3 Adjust the seatback so that the controls are easy to operate.
□
4 Wear the safety seat belt correctly.