Atom 506AV Operator Owner'S Manual Download Page 20

DATE OF PURCHASE:

PURCHASED BY:

Address

State:

Post/Zip Code:

SOLD BY:

Address:

State

Post/Zip Code:

Atom warrants each new Atom Edger Model for ONE YEAR for residential use and 90
days for commercial use based on the following terms.

The warranty extends to the original retail purchaser only and commences on the date of
the original retail purchase.

Any part of the Atom Edger manufactured or supplied by Atom and found in the reasonable
judgement of Atom to be defective in material or workmanship will be repaired or replaced
by an authorized Atom service dealer without charge for parts and labour.

The Atom Edger, including any defective part, must be returned to an authorized service
dealer within the warranty period. The expense of delivering the Atom Edger to the
dealer for warranty work and the expense of returning it back to the owner after repair or
replacement will be paid for by the owner. Atom’s responsibility in respect to claims is
limited to making the required repairs or replacements and no claim of breach of warranty
shall be cause for cancellation or rescission of the Contract of Sale of any Atom Edger.
Proof of purchase will be required by the dealer to substantiate any warranty claim. All
warranty work must be performed by an authorized Atom service dealer or by Atom.

This warranty is limited to NINETY (90) days from the date of original retail purchase for
any Atom Edger that is used for commercial purposes and ONE (1) month for rental
purposes.

This warranty does not cover any Atom Edger that has been subject to misuse, neglect,
negligence or accident, or that has been operated in any way contrary to the operating
instructions as specified in the Atom Operator’s Manual. This warranty does not apply to
any damage to the Atom Edger that is the result of improper maintenance or to any Atom
Edger that has been altered or modified so as to adversely affect the product’s operation,
performance or durability or that has been altered or modified so as to change its intended
use. The warranty does not extend to repairs made necessary by normal wear or by the
use of parts or accessories which are either incompatible with the Atom Edger or adversely
affect its operation, performance or durability.

Atom reserves the right to change or improve the design of any Atom Edger without
assuming any obligation to modify any product previously manufactured.

ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE ONE YEAR
WARRANTY PERIOD OR NINETY (90) DAYS FOR PRODUCTS USED FOR ANY
COMMERCIAL PURPOSE AND ONE (1) MONTH FOR RENTAL PURPOSES.
ACCORDINGLY, ANY SUCH IMPLIED WARRANTIES, INCLUDING
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE,
ARE DISCLAIMED IN THEIR ENTIRETY AFTER THE EXPIRATION OF THE
APPROPRIATE TWELVE (12) MONTHS OR THIRTY (30) DAY WARRANTY PERIOD.
ATOM’S OBLIGATION UNDER THIS WARRANTY IS STRICTLY AND EXCLUSIVELY
LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS AND ATOM
DOES NOT ASSUME OR AUTHORIZE ANYONE TO ASSUME FOR THEM ANY
OTHER OBLIGATION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.

ATOM ASSUMES NO RESPONSIBILITY FOR INCIDENTAL, CONSEQUENTIAL OR
OTHER DAMAGES INCLUDING, BUT NOT LIMITED TO, EXPENSE OF RETURNING
THE ATOM PRODUCT TO AN AUTHORIZED SERVICE DEALER AND EXPENSE
OF DELIVERING IT BACK TO THE OWNER, MECHANIC’S TRAVEL TIME,
TELEPHONE OR TELEGRAM CHARGES, RENTAL OF A LIKE PRODUCT, DURING
THE TIME WARRANTY SERVICE IS BEING PERFORMED, TRAVEL, LOSS OR
DAMAGE TO PERSONAL PROPERTY, LOSS OF REVENUE, LOSS OF USE OF
THE PRODUCT, LOSS OR TIME, OR INCONVENIENCE. SOME STATES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.

This warranty applies to Atom Edger Model manufactured by Atom.

For warranty procedure for Honda engine please refer to separate engine warranty available from your nearest authorised Honda dealer who will also carry out
any engine service required.

IMPORTANT: PLEASE FILL OUT THE INFORMATION BELOW ON PURCHASE

Atom Edgers are manufactured in Australia and exported around the world.

Aust. Patent No. 678575.

US Patent No’s 5, 826, 667 & 6,116, 350.

Other Australian and US Patents pending. Patent Pending in Europe, Japan and elsewhere.

Design registrations granted in Australia, USA, Japan and Great Britain.

Patents pending on Cross-Blade system.

Operator Manual. Part No. 43987. Printed in Australia.

Copyright © 2005 Atom Industries. All rights reserved

Atom Industries

9 Fred Street, Lilyfield NSW 2040 Australia

PO Box 513, Rozelle NSW 2039 Australia.

Phone: (02) 9810 0194 • International: (+61) 2 9810 0194

Fax: (02) 9810 6691 • International: (+61) 2 9810 6691

Email: [email protected]

Atom Industries is a division of Solo Industries Pty Ltd

(ACN 000 583 924).

Patents and registrations granted and pending.

webside: www.atomindustries.com.au

Atom Industries (NZ) Limited

PO Box 23500 Papatoetoe, Auckland New Zealand.

Freecall 0800 174 753

Freefax 0800 603 403

Email: [email protected]

Patents and registrations granted and pending.

webside: www.atomindustries.co.nz

Keep this manual as proof of purchase. This is your
Lawn Edger machine model number. Should you
ever require any parts, please quote these
numbers.

Summary of Contents for 506AV





















Reviews: