atolla Bauihr T203, Quick Start Manual, Page: 14 / 83

between the measurements as possible (with the
use of bubble level), Press ON/Measurement Button
again to measure the distance of the horizontal
point (3). The measurement will be displayed in the
third line.
5.The result of the calculation (Distance 1-2) is
displayed in summary line.
Self-Calibration
Power off, long press button ON/READ for 5 seconds
till it shows “boot”, and long-press ON/READ button
again till it shows "CAL" and a following figure
displays on the screen. Users can adjust the figure
with button ON/READ according to the accuracy of
the meter. Adjusting range: -7 to 7mm; then long-
press button ON/READ again to set the buzzer by
selecting “bP.on” or “bP.oFF”; then long-press button
ON/READ again to set the backlight by selecting
“bL.on” or “bL.oFF”. Finally, long-press button ON/
READ to save all the settings.
aning
Do not immerse the Bauihr T203 Laser Distance
Meter in water. Wipe off dirt with a damp soft cloth.
Storage
The Bauihr T203 Laser Distance Meter must be stored
in a dry secure area between 14°F (-10°C) and 140°F
(60°C) and humidity less than 70% RH. Store the tool
in a locked area out of the reach of children and
people unfamiliar with the instrument. Remove the
batteries before any long period of storage or
shipping to avoid battery leakage.
Further information on accessories can be found at
www.atolla.us