Page 14/32 (23/21)
Assembly and adjustment
The Stand aid has been delivered to you
as a complete hoist unit, so no assembly is
required.
Unpack the product and remove the
packing materials. Ensure that all supplied
components are present and undamaged.
Please check before using, that all plug
connections are plugged in correctly and
secured. All sockets are located on the
underside of the control unit case (Image 1
– 4 )
Before using the Vita-Lift
210 please note
following:
The battery ( 4 ) must be loaded
before the first use. For loading insert the
plug in the power cord (Image 1 – 12),
ensure that the Emergency stop 11 is in
the out position and allow the battery to
recharge for 2 hours prior to use. Use only
the originally supplied power cord.
If the Emergency stop is pressed in, then
hold and rotate the red button clockwise
and the button will pop out and the unit
will function.
If the control unit is connected to the power
plug on power grid, the two LED displays
(ON/Charge) flash on. As soon as full
capacity is reached, the orange LED display
„Charge“ goes out.
The operation of the Vita-Lift
210 is not
available while loading! Therefore we
recommend to charge the battery after
using evry day.
Image 1
4
12
10 Assembly and adjustment
10.1 Basic model
