background image

Page  7/28 (24/21)

Safety instructions

•  Do not use the rehab aid before ensuring 

a complete and correct fitting of the 
safety belts, if available.

•  Check all adjustable parts are locked, 

before every use of the aid.

•  Please note the individual and overall 

safety relevant information when using 
several rehabilitation aids simultaneously.

•  All aspects of spatial influences (wet and 

smooth floors, steps or similar) must be 
taken into consideration by the carer or 
user.

•  Carefully check tensioning devices and 

suchlike for secure fit.

•  Please observe the maximum adjustment 

range when adjusting the height of the 
armrests. This is indicated by a mark on 
the armrests.

•  When used as intended, stability in all 

directions is ensured. Because the footrest 
can be adjusted forward, a child standing 
on the footrest can cause the device to tip 
over. Please pay attention accordingly!

•  Check regularly if all screws and handles 

etc. are firmly tightened. Worn and 
defect parts are to be repaired or replaced 
immediately. This is especially important 
to ensure a safe use of the rehab aid! 
Carefully check the clamping jigs and the 
like are securely fixed.

•  Do not use the aid, if parts of it are 

damaged or missing. Missing parts are 
only to be replaced with original spare 
parts.

•  Do not carry out any interferences or 

measurements if you are unsure of their 
effects; for your own safety contact the 

nearest service centre or contact the 
dealer directly.

•  In case of accidents or malfunctions, 

contact the dealer or manufacturer from 
whom you purchased the device.

•  The manufacturer is not liable for damage 

to persons, objects or animals resulting 
from false usage of the equipment by the 
user or third parties, through incorrect 
mounting of parts and accessories, by 
neglect or poor maintenance, neglect, 
through unauthorized alterations and 
modifications, usage of non-original 
spare parts or accessories, through 
unpredictable and exceptional events 
resulting from non-compliance of the 
regulations in the presented operating 
manual.

•  Clean the therapy chair Ursberg in 

accordance with the instructions given in 
the chapter „cleaning”.

•  Please ensure before use the product 

is cleaned according to the cleaning 
instructions and if indicated also 
disinfected. 

•  Any serious incidents occurring in 

connection with the product must be 
reported to the manufacturer (ATO 
FORM GmbH) and the competent 
authority of the country in which the user 
is resident.

Summary of Contents for Ursberg





























Reviews: