ato form Liftolet-Tilty, User Manual

Page: 15 / 32

Page 15/32 (23/21)
Assembly and adjustment
Non-liability
The person carrying out the works is soley
responsible for proper and professional
mounting of the Liftolet. The manufacturer
accepts no liability for the carried out works
or any damages resulting from this.
Attention
Make sure that the charging cable is
outside the area of use.
Attention
Before first use, the batteries must be
charged for 24 hours to ensure proper
function and extended life.
Liftolet Tilty can be equipped with a
rechargeable battery unit, which can be
permanently supplied with charging current
via the control unit.
LED power indicator Battery
Steady yellow Charging
(battery not ready)
No LED light Fully charged
(battery ready)
Yellow flashing Error during charging
LED operating display control unit
Orange Over battery and operation
System is working properly
No LED Over battery but not in
operation, not connected
to mains power
Buzzer function
The buzzer sounds a warning when a but-
ton on the hand control is pressed and the
battery capacity is low.
The buzzer can also be activated via the
control unit to signal other states. This must
be specified in the software of the control
unit.
The battery is permanently connected and
is supplied with charging current via the
control unit.