Page 21/36 (24/21)
Assembly and adjustment
A
Therapy table for prone position
Therapy table for supine position
Therapy table for prone and supine
position
Start by removing the upper supporting
cushion by loosening both locking screws.
Mount the painted table holder (adjusting
screws are on the top) onto the long guide
rails and tighten the adjusting screws.
Now assemble the upper standard support
cushion again.
Mount the chrome telescopic tubes, de-
pending on its intended use. (see image)
Now you can mount the table top, by
placing the holders into the respective
fixings and tighten the locking screws into
the desired height. Use clamping levers to
adjust angle and use allen screws to
adjust height and depth.
