Page
8
of
35
T
he Setup menu can be accessed by pressing the “Setup” button on your remote to access some
advanced settings for the receiver. To move through each item, use the up/down arrow keys, to
adjust the value, using the left/right arrow keys located around the “OK” button.
1-
Saturation:
If you realize that the picture is not clear or saturated enough, you can adjust
that setting; a preview will apply immediately in background. Once you confirm you are
satisfied with the new setting, press the “OK” button to save the setting, otherwise, the
previous setting will be reverted back to the previous setting.
2-
Contrast:
If you think that the picture has too much contrast or too low contrast, use that
option to adjust it accordingly.
3-
Hue:
This will be used to adjust the level of color of the picture, if you find that the picture
does not show full color on the TV.
4-
Brightness:
Adjusting the brightness of the screen
5-
HD Output:
This setting can only be adjusted if you are using HDMI or Component Cables.
On S-Video/Composite output this does not affect the resolution or any adjustment on the
video. If you were using HDMI and you set it to a resolution that is not supported by your
TV, you can use one of the above 2 connections to change the setting back and then
reconnect the HDMI or component cables again.
