6
NOTE:
The protective lens cap has several small holes in it to allow it to be used as a daylight filter.
When using this as a daylight filter you will notice a double vision, this is normal due to the catadioptic
lens system.
Next move to a dark environment and remove the lens cap.
Observe the scene and adjust the focusing of PS-22 by rotation the focusing ring. Also focus the day-
time scope for optimal clarity.
Turn on the illumination of daytime scope reticle (if any) and adjust its brightness (see your daytime
scope's user manual).
To turn the PS22 off, draw and turn the operation switch to the OFF-position.
REMOTE CONTROL
Attach the Remote Control cable to connector on the side of the body of device. Place the Remote Control
on the weapon, suiting your shooting style best and grip. Fix the Remote Control in this position with a
montage strap.
For using the device with Remote control, rotate the Operation Switch from the OFF position to STB posi-
tion. To turn the device on push the button of remote control. Keep pressed button when observing scene.
The scope is turned off immediately after releasing remote control button.
To switch the Remote Control mode OFF rotate the Operation Switch from the STB position.
IR ILLuMINATOR
The IR illuminator greatly enhances the performance of your PS22, while remaining almost totally invis-
ible to the naked eye.
NOTE:
It is important to remember that the IR illuminator is simply an infra red light source, and like any
light source it may loose its effectiveness over a great distance.
IR450 illuminator is mounted onto the picatinny rail.
The IR illuminator control buttons are located on its side. To switch the Digital IR illuminator
on/off press “+” and “-” buttons simultaneously. When the IR illuminator is switched on you can see the
green LED lit. By pushing the buttons “+” and “-” you may adjust the IR brightness.
The IR beam is focusable to change the field of coverage. To change the beam width slightly turn the
IR lens.
You could change the IR control panel fitting your needs. The wrench included into the set should be
used for weakening the fixing nut located on the IR. Rotate the IR placing at in the most convenient
position. Tighten the nut with the wrench to fix the new position.
IR Brightness Adjustment
Battery Housing
Fixation Screw
IR Elevation
IR Windage
IR Focusing
Nut
