ATN ATN 6015, Operator'S Manual

Page: 54 / 92

2-30
(2) Install the headmount per the instructions in paragraph 2.3.7.
NOTE
It may be necessary to remove the browpad (Figure 2.10.)
when wearing the headmount over a protective mask.
2.3.11. INSTALLATION OF WEAPON MOUNT
perform the following procedure to install the weapon mount.
FIGURE 2.15. WEAPON MOUNT USAGE
CAUTION
The MUNVM is not a weapon sight, however, it can be used
in conjunction with a collimated dot sight or laser aiming
device.
NOTE
It is recommended that the eyecup be replaced with the eye -
guard during weapon mounted use.
(1) orient the monocular and weapon mount as shown in Figure
2.15. Be sure to align the alignment boss on the weapon mount with
the alignment groove in the monocular.
WEAPON
MoUnt
alIGnMent BoSS
(HIDDen)
THUMBSCREW
ClaMpInG KnoB