7
PREPARATION FOR OPERATION
Before getting started make sure to follow these steps:
• Take the scope out of the case.
• Install the batteries into its housing with the polarity order shown on the main body of the unit.
• Switch on the Aries scope with the master power switch, make sure the protective lens cover
is still attached to the tens.
• The unit will turn on automatically when you bring it to your eye. a proximity emitter will send
a beam out, that will sense the distance to your forehead.
• We suggest that you use your right eye to aim through the scope. Make sure to have both of
your eyes open so you will be able to see the color-coded LEDs with your left eye.
• In order to assure the proper functioning of the proximity sensor make certain, that the pro-
tective glass surface of the sensor is always clean.
• When the scope is first powered up, the initial settings are:
Light intensifier tube Brightness - 100%;
Reticle brightness - 50%;
Illuminator brightness - 100%.
• Observe the scene, and adjust the doctor for optimal image clarity,
• You may now enter a dark environment, or simply shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter.
• Observe the scene, and adjust the front lent for Ideal focus.
• Adjust the digital features as needed
• The unit will turn-off automatically If you move It away from your face.
• To Increase battery life, the
led
diodes will go off after 10 seconds.
• You will need to focus for different distances.
• Take your time learning about your “smart” scope. It will take practice to properly use this
device. As you use this scope you will be able to improve your speed of focusing, as well as
sharpness of image.
• Have fun and enjoy.
