Vaping on the Tripod
About your mouth piece.
You may use either the custom Drip Tip
that comes pre-installed or replace it with any
510 type drip tip of your choice.
The pre-installed Drip Tip is a two -
parts assembly. The two parts are sandwich-
ing the Top Cap for extra stability. To remove
them, unscrew the top Tip part with your
fingers, holding the bottom part still (2a). Push
bottom Tip part down with the help of the
unscrewed top part (2b). This will also pop the
custom SIL gasket off its Top Cap nesting
groove, so gently put it back in place.
Refilling the Tripod.
Always shut off liquid intake slots
before refilling. To do this, rotate tank section
on Base until side slots of Chimney are quite
far from deck liquid slots right beneath.
English
6
To refill, rotate Top Cap on Seal, until
you align the triangle that is engraved on Top
Cap side with the dot engraved on Seal rim.
Then pull up gently. Refill through the Seal
slots and reverse the above steps to assemble
back for use. Always prefer to operate Top
Cap clockwise, either to remove or to replace,
to avoid accidental unscrewing of tank section
assembly.
Summary of Contents for atmizoo tripod
Page 1: ...Tripod user manual ...
