ATMIZONE atmizoo tripod, User Manual

Page: 2 / 10

This is the Tripod
English 2
The Tripod is Atmizone’s new approach to 22mm RTA design for single coil setups. It
offers an unparalleled vaping experience focusing on performance, versatility and
ergonomics. With its enhanced flavor and vapor production, potential for variable specs,
instant real time access to deck, instant top refill system, easy rebuilding and attention
to details, the Tripod is one step ahead of most RTAs out there.
- Air flow tuning via 4 pin options with air hole D=1.0mm/1.2mm/ 1.5mm/1.8mm
pinned inside a D=4.0mm nest or via an AFCS Ring adjusting from zero to D=4.0mm.
- M2.5mm pan head phillips post screws .
- Two parts screw-in custom Drip Tip / inner D=4.0mm, can also host any 510 drip tip.
- 10.0mm post-to-post space , ~6.6mm post-to-post net space , ~5.8mm coil space .
- Tank capacity 2ml.
- Max. net coiling height ~9.0mm (C & C Reducer out) / ~5.3mm (C & C Reducer in)
- Chimney top inner D ~5.2mm (C & C Reducer out) / ~3.0mm (C & C Reducer in)
- Height 510 excl., 39mm [Drip Tip off] / 47.0mm [Drip Tip on] / Weight ~56g
Features and specs
What’s in the box
- 1 x Tripod RTA (1 x Chamber & Chimney Reducer pre-installed)
- 1 x Set of spares (2 x Post Screws, 1 x O-ring Kit, 1 x Tank Body, 1 x AF Pins Kit)
- 1 x Set of User Guide / Warranty Card