Software Description
T8xC5121 Starter Kit User Guide
5-17
4186E–SCR–05/04
5.1.1
Verifying the
Application
Once programming is complete, press the “Start Application” button on the FLIP
window.
The LED0 blinks until a card is introduced. This indicates the device has been pro-
grammed. Exit from FLIP. Switch Off the demonstration board.
5.2
Running the
Demonstration
Program
5.2.1
Running Quickterm
PC Software
Run Quickterm. Software is located in the directory:
Starterkits\T89C5121-SK1\QuickT_demo
1.
Execute the ‘quickterm-1_0_7.exe’ file.
2.
In the Quickterm File Menu, select the "Read TRM...” command and locate
“T89C5121.trm” file.
3.
Turn On the demonstration board.
Note:
Help is available in the menu and F11 can be used to clear the display.
For the T89C5121 version, after Reset, LED0 is off during the download of program
from EEPROM to Code RAM (4 seconds at 14.7456 MHz).
When this sequence is achieved, the program is automatically executed and the LED0
blinks again while waiting for a card.
The message “Insert a card” is displayed in the Quickterm window.
Figure 5-1. Quickterm Card Reader Window
Insert a card into the reader with the chip side facing the bottom of the board, the LED0
turns on.
Two types of cards can be read when inserted:
