9
SAMA5D3 Xplained [USER GUIDE]
Atmel-11269D-ATARM-SAMA5D3-Xplained-XPLD-User Guide_07-Sep-15
The SAMA5D3 Xplained board is equipped with the interface connectors described in
Table 4-1
.
4.2
Function Blocks
Figure 4-2.
Evaluation Kit Architecture
Table 4-1.
SAMA5D3 Xplained Board Interface Connectors
Header
Interfaces to
J2
Main power supply
J6
USB A device. Supports USB device using a Micro-AB connector
J7 (upper)
USB B Host. Supports USB host using a type A connector
J7 (lower)
USB C Host. Supports USB host using a type A connector
J23
Serial DBGU 3.3V level
J24
JTAG, 20-pin IDC connector
J10
SD/MMC connector
J11
Micro-SD connector
J12
Gigabit Ethernet ETH0
J13
Ethernet ETH1
J22
Expansion connector with all LCD controller signals for display module connection (QTouch
®
, TFT LCD
display with Touch Screen and backlight
C41
Optional SuperCap
J14–J21
Expansion connectors with Arduino R3 compatible PIO signals
–
Various test points located on the board
JTAG
DBGU
JTAG & DBGU
SERIAL
DATA
Micro SD
CARD
10/100/1000
FAST ETHERNET
10/100
ETHERNET
SD
CARD
LCD
Connector
FLASH
ETH0
ETH1
PIO A,...E
PIO A,...E
Single
PMU
Solution
5V INPUT
ATMEL
SAMA5D36
CORTEX-A5 PROCESSOR
2Gb
DDR2
SDRAM
2Gb
NAND
FLASH
USB
DEVICE
USB
Host
x2
ANALOG Reference
VBAT
USER
LEDS
PIO
Expansion Headers
Power rails
USB A,B,C
Reset
Force PwrOn
Push
Buttons
EBI
5V & 3V3
(Up to 4Gb)
(Up to 4Gb)
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
