Atmel SAM4S-EK2, User Manual

Page: 9 / 50

Evaluation Kit Hardware
SAM4S-EK2 User Guide 4-2
11176A–ATARM–24-Sep-12
4.2 Features List
Here is the list of the main board components and interfaces:
„ SAM4SD32 chip LQFP100 package with optional socket footprint
„ 12 MHz crystal
„ 32.768 KHz crystal
„ Optional SMB connector for external system clock input
„ NAND Flash
„ 2.8 inch TFT color LCD display with touch panel and backlight
„ UART port with level shifter circuit
„ USART port with level shifter circuit multiplexed with RS485 port with level shifter circuit
„ Microphone input and mono/stereo headphone jack output
„ SD/MMC interface
„ Reset button: NRST
„ User buttons: Left and Right
„ QTouch
®
buttons: Up, Down, Left, Right, Valid and Slider
„ Full Speed USB device port
„ JTAG/ICE port
„ On-board power regulation
„ Two user LEDs
„ Power LED
„ BNC connector for ADC input
„ BNC connector for DAC output
„ User potentiometer connected to the ADC input
„ ZigBEE connector
„ 2x32 bit PIO connection interfaces (PIOA, PIOC) and 1x16 bit PIO connection interface (PIOB)
4.3 Function Blocks
4.3.1 Processor
The SAM4S-EK2 is equipped with a SAM4SD32 device in LQFP100 package.
4.3.2 Memory
The SAM4SD32 chip embeds:
„ 2048 Kbytes of embedded Flash
„ 160 Kbytes of embedded SRAM
„ 16 Kbytes of ROM with embedded BootLoader routines (UART, USB) and In-Application Programming
functions (IAP) routines