Atmel AVR2040: REB231ED Evaluation Kit
Quick Start Guide
Features
This application note briefly describes how to set up and run the pre-flashed
performance test application included with the Atmel
®
REB231ED evaluation kit.
The Atmel Controller Base Board (CBB) is intended to serve as the microcontroller
platform for the Atmel Radio Extender Board (REB) family. A REB connected to a
CBB forms a battery powered, fully functional and portable wireless node. The
REB231ED evaluation kit was created for evaluating the
transceiver.
1 Kit contents
2 x Atmel Controller Base Board (CBB)
2 x REB231ED Radio Extender Board (REB)
2 x RS232 level shifter cable
4 x AAA battery
1 x Quick start guide
From left to right: 2 x CBB, 2 x REB, 2 x RS232 cable.
2 Board assembling
1. Check/set power switch off on the two CBBs.
2. Insert two batteries in each CBB.
3. Connect each REB to a CCB to create two REB-CBB assemblies.
8-bit Atmel
Microcontrollers
Application Note
Rev. 8381B-AVR-09/11
Expand1
Connector