1.
Introduction
1.1.
Features
•
4.3" Display module
•
ILI9488 LCD Driver
•
320x480 Resolution
•
Parallel interface (up to 18-bit)
•
Parallel RGB interface
•
3- and 4-wire SPI interface
•
maXTouch capacitive touch screen controller
•
Xplained Pro hardware identification system
•
Kit Contents
•
One 4.3" display module
•
One 50-way Flexible Flat Cable (FFC)
•
One 20-way Ribbon Cable
•
Four mounting screws and eight threaded spacers
1.2.
Kit Overview
Atmel maXTouch Xplained Pro is an extension board for the Xplained Pro platform with a 320x480 RGB
LCD and a capacitive touch sensor with a maXTouch controller. The LCD can be controlled via different
interfaces, including 3- and 4-wire SPI, Parallel and RGB Parallel interface mode using the DIP-switch to
select the interface. The maXTouch Xplained Pro kit connects to any Xplained Pro standard extension
header on any Xplained Pro MCU board using the 20-pin header, but is limited to 3- and 4-wire SPI
mode. maXTouch Xplained Pro also features a standard Xplained Pro LCD connector (FFC), which
enables use of the parallel interfaces. Both connections features SPI interface for the LCD and I
2
C for the
maXTouch device.
Atmel maXTouch Xplained Pro [USER GUIDE]
Atmel-42350B-maXTouch-Xplained-Pro_User Guide-01/2016
3
