Figure 4-3. Bottom Side Mounting
The stacking is supported by spacers and screws.
Figure 4-4 Display Module Top-stacked
on page 16
shows an display module stacked on top of a MCU board.
Figure 4-5 Display Module Bottom-stacked
on
page 17 shows an LCD board stacked on the bottom side of a MCU board, note that the MCU board
has been flipped upside down in this drawing. Both of these mounting configurations requires four long
spacers (M2.5 x 20mm, female/male), four short spacers (M2.5 x 10mm, female/female), and four screws
(M2.5 x 5mm).
Figure 4-4. Display Module Top-stacked
LCD Board
Screw
Spacer
Spacer
MCU Board
Display
Atmel maXTouch Xplained Pro [USER GUIDE]
Atmel-42350B-maXTouch-Xplained-Pro_User Guide-01/2016
16
