Atmel Dual Triple DMOS Output Drivers with Serial Input and PWM Control ATA6831, Application Note

Page: 9 / 20

9
9120A–AUTO–01/08
ATA6831/ATA6832 Driver ICs
Table 5-1. Functions of the Serial Interface Register Bits
Bit Input Register Function
0 SRR Status register reset (high = reset; the bits PSF, OPL, and SCD in the output data register are set to low)
1 LS1 Controls output LS1 (high = switch output LS1 on)
2 HS1 Controls output HS1 (high = switch output HS1 on)
3 LS2 See LS1
4 HS2 See HS1
5 LS3 See LS1
6 HS3 See HS1
7 PL1 Output LS1 additonally controlled by PWM input pin
8 PH1 Output HS1 additonally controlled by PWM input pin
9 PL2 See PL1
10 PH2 See PH1
11 PL3 See PL2
12 PH3 See PH2
13 OLD Open load detection (low = open load currents are active)
14 OCS Overcurrent shutdown (high = overcurrent shutdown is active)
15 SI
Software inhibit; low = standby, high = normal operation
(data transfer is not affected by the standby function because the digital part is still powered)