Atmel AVR364 User Manual Download | Manualshive

Page: 15 / 15

background image

8377B-AVR-11/11

Atmel Corporation

2325 Orchard Parkway
San Jose, CA 95131
USA

Tel:

(+1)(408) 441-0311

Fax:

(+1)(408) 487-2600

Atmel Asia Limited

Unit 01-5 & 16, 19F
BEA Tower, Milennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG

Tel:

(+852) 2245-6100

Fax:

(+852) 2722-1369

Atmel Munich GmbH

Business Campus
Parkring 4
D-85748 Garching b. Munich
GERMANY

Tel:

(+49) 89-31970-0

Fax:

(+49) 89-3194621

Atmel Japan

9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chou-ku, Tokyo 104-0033
JAPAN

Tel:

(+81) 3523-3551

Fax:

(+81) 3523-7581

©

2011 Atmel Corporation. All rights reserved

.

Atmel

®

, Atmel logo and combinations thereof, AVR

®

, AVR

®

logo, AVR Studio

®

, megaAVR

®

, QTouch

®

, DataFlash

®

, and others are

registered trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Disclaimer:

The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to

any intellectual property right is granted by this document or in connection with the sale of Atmel products.

EXCEPT AS SET FORTH IN THE ATMEL

TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS
ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE
LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION,
DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO
USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Atmel makes no representations or

warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and
product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically
provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or
warranted for use as components in applications intended to support or sustain life.

«
...
13
14
15

Summary of Contents for AVR364
















Reviews:

No comments

Related manuals for AVR364

Brand: Ubiquiti Pages: 24

Brand: EAW Pages: 6

Brand: EAW Pages: 6

Brand: Octavo Pages: 28

Brand: Obihai Pages: 2

Brand: Gate Pages: 8

Anybus Communicator ABC4021

Brand: HMS Networks Pages: 60

Brand: Longshine Pages: 27

AAA-130SA SERIES

Brand: Adaptec Pages: 94

Brand: FDI Pages: 2

EK-FC285 GTX Classified

Brand: ekwb Pages: 2

4 Channel Input Buffer Board SDAIBB

Brand: B&B Electronics Pages: 22

Brand: Nakayo Pages: 119

Brand: Omron Pages: 6

Brand: Alarm Pages: 5

Disc Publisher XR

Brand: Primera Pages: 2

Brand: Vecow Pages: 61

Brand: Compal Pages: 47

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands