AVR
®
ATICE10 User Guide
2-1
Section 2
Preparing the ICE10 System for Use
For successful operation, the ICE10 must be connected and configured correctly. This
section explains how to connect the system, and how to determine which Pod to use to
successfully emulate a specific AVR part.
2.1
General
Hardware
Description
Figure 2-1 shows a simplified block diagram of the ICE10 connected to a target board.
Once the emulator is connected and configured correctly, it will behave like the emu-
lated device, and allows easy prototyping and debugging of applications in real-time.
Figure 2-1.
ICE10 Connected to Target Board
Figure 2-2.
ICE10 Emulator Unit
The ICE10 emulator unit (Figure 2-2) contains the necessary logic to emulate all digital
functions of the emulated AVR. It also contain hardware needed to communicate with
ICE10 Emulator Unit
POD
(ATtiny15POD
or
AT90ADCPOD)
PROBE
TARGET BOARD
Rev. 1632B-09/01
