Getting Started Guide for ATWINC3400 W-Fi using SAM D21 Xplained Pro [USER GUIDE]
Atmel-42640A-Getting-Started-Guide-for-ATWINC3400WiFi-using-SAMD21-Xplained-Pro_UserGuide_02/2016
2
1
21
Open the SAM D21 EDBG DEBUG USB serial COM port, with the following settings:
115200 bauds
8-bit data
No parity
One stop bit
DTR/DSR flow control
Open a serial terminal tool to see the result. You can use your preferred serial terminal, such as PuTTY,
TeraTerm, etc. You can also use terminal window plug-in in Atmel studio. You can install it through below
menu. (Menu → Tools → Extension Manager.)
Connect to the device.
The following information will be displayed on the terminal window.
-- WINC3400 time client example --
-- SAMD21_XPLAINED_PRO --
-- Compiled: XXX XX XXXX XX:XX:XX --
(APP)(INFO)Chip ID 3400d0
(APP)(INFO)Firmware ver : X.X.X
wifi_cb: M2M_WIFI_RESP_CON_STATE_CHANGED: CONNECTED
wifi_cb: M2M_WIFI_REQ_DHCP_CONF: IP is XXX.XXX.XXX.XXX
(APP)(INFO)1 Socket 7 session ID = 1
resolve_cb: DomainName pool.ntp.org.
socket_cb: The GMT time is 11:34:50
