Getting Started Guide for ATWINC3400 W-Fi using SAM D21 Xplained Pro [USER GUIDE]
Atmel-42640A-Getting-Started-Guide-for-ATWINC3400WiFi-using-SAMD21-Xplained-Pro_UserGuide_02/2016
2
0
20
5. You will be asked to select your debug tool:
6. Select EDBG and SWD (Serial Wire Debug) as Interface and increase the SWD clock frequency to
12MHz.
7. Click again on the Start Debugging and Break icon:
8. The application will be programmed in the SAM D21 embedded flash and breaks at main function. Click
on continue to execute the application:
You may be asked to upgrade your EDBG firmware. If so, click on Upgrade button:
Upgrade operation may take a few minutes,
wait
for the operation to complete.
The example is now programmed and running.
