ATWINC3400
Getting Started Guide for ATWINC3400 Wi-Fi using SAM
D21 Xplained Pro
USER GUIDE
Introduction
This getting started guide describes the Atmel
®
ATWINC3400 Wi-Fi
®
Network
Controller to build state-of-the-art Internet of Things (IoT) applications. The guide
explains hardware information and how to install Atmel Studio (IDE), compile
examples, and download ATWINC3400 firmware.
The following topics will be covered:
How to get Atmel Studio (IDE) and install it
Update new ASF package
Target board information
How to get time client example project
How to get log message
How to download firmware and certificate
Prerequisites
Hardware Prerequisites
–
Atmel SAM D21 Xplained Pro Evaluation Kit
–
Atmel ATWINC3400-XPRO extension board
–
Atmel IO1 extension board
–
Micro-USB cable (Micro-A / Micro-B)
Software Prerequisites
–
Atmel Studio 7.0
–
Time client example project source code
Atmel-42640A-Getting-Started-Guide-for-ATWINC3400WiFi-using-SAMD21-Xplained-Pro_UserGuide_02/2016
