2
Testing the ATSTK94
2449A–FPSLI–01/02
Downloading to the
Configurator
•
Go to the
Start
menu and choose
Programs > Atmel > Atmel CPS 7.0x
. Atmel
CPS opens, see Figure 1.
Figure 1.
Atmel CPS Window
•
Select
/P Partition, Program and Verify from an Atmel File
from the
Procedure
pull-down menu in the CPS window.
•
Use the
button from the
Input File
pull-down menu to locate the
test_fpslic.bst
file under
c:\training\fpslic\lab1
.
•
Use the
button from the
Output File
pull-down menu to indicate the
out.bst
file
under
c:\training\fpslic\lab1
.
•
Select
1M
from the
EEPROM Density
pull-down menu.
•
Use the default options for the rest.
•
Press
Start Procedure
to program the Configurator.
If the utility has not been calibrated on a given PC, the Clock Calibration dialog will
be displayed when the
Start Procedure
button is clicked, see Figure 2. For best
results, it is highly recommended to allow
Clock Calibration
to proceed prior to the
execution of the procedure. The clock calibration routine accounts for any variations
in time delay units between different processors.
