3
Testing the ATSTK94
2449A–FPSLI–01/02
Figure 2.
Clock Calibration Dialog Box
•
Press
Yes
. A calibration accuracy dialog box opens.
Low
,
Medium
and
High
refer to the accuracy of the calibration. A high level of cali-
bration will require more time to complete. Calibration can be performed again or at
a later time by going to the
Calibrate
menu and selecting
Calibrate now
. The
out.bst
file can be overwritten.
If successful, the results are shown in Figure 3.
Figure 3.
CPS Window Results
•
After CPS reports successful completion you can switch from
Prog.
to
Run
.
Your design starts to run. The Alphanumeric will show a count sequence from 0 to 9
and from A to Z and will then reset to 0. The LED will show the counting up
sequence.
