15
Connecting kit in Tx Test (Single node / CW):
CW – Continuous Wave Transmission
9.1. Select the COM Port from the dropdown menu and select a COM port to which the kit to be connected and
click “Connect”
Figure.13 Performance Analyzer – COM Port Selection
Note: COM17 from the above figure is an example. The COM Port number varies depending upon the PC.
9.2. Set the COM settings from the pop-up window. Click “Defaults” and then click “OK”
9.3. To check “transmit only” functionality; right click on the Kit information area select “Continue as a single node”.
This setting is used for continuous transmission.
