Atmel ATSAML22G16A-AUT, Manual

Page: 1150 / 1231

Symbol Description Max. Units
PL0 PL2
f
GCLK_SERCOM0_CORE
SERCOM0 input clock frequency 12 48 MHz
f
GCLK_SERCOM1_CORE
SERCOM1 input clock frequency
f
GCLK_SERCOM2_CORE
SERCOM2 input clock frequency
f
GCLK_SERCOM3_CORE
SERCOM3 input clock frequency
f
GCLK_SERCOM4_CORE
SERCOM4 input clock frequency
f
GCLK_SERCOM5_CORE
SERCOM5 input clock frequency
f
GCLK_TCC0
TCC0 input clock frequency 24 96 MHz
f
GCLK_TC0, GCLK_TC1
TC0,TC1 input clock frequency 12 48 MHz
f
GCLK_TC2, GCLK_TC3
TC2,TC3 input clock frequency
f
GCLK_ADC
ADC input clock frequency 12 48 MHz
f
GCLK_AC
AC digital input clock frequency
f
GCLK_PTC
PTC input clock frequency
f
GCLK_CCL
CCL input clock frequency
f
GCLKin
External GCLK clock input
45.6. Power Consumption
The values in this section are measured values of power consumption under the following conditions,
except where noted:
• Operating conditions
– CPU is running on flash with 1 wait states for V
DD
=3.3V and 3 wait states for V
DD
=1.8V
– Low power cache is enabled.
– BOD33 disabled
– I/Os are inactive input mode with Input trigger disable
• Oscillators
– XOSC (crystal oscillator) stopped
– XOSC32K (32kHz crystal oscillator) running with external 32kHz crystal
– When in active PL2 mode FDPLL using XOSC32K as reference and running at 32MHz
– When in active PL0 internal Multi RC Oscillator running at 8MHz or 4MHz
Atmel SAM L22G / L22J / L22N [DATASHEET]
Atmel-42402E-SAM L22G / L22J / L22N_Datasheet_Complete-07/2016
1150