Atmel AT91SAM9G10-EK, User Manual

Page: 34 / 39

AT91SAM9G10-EK Evaluation Board User Guide 6-1
6479A–ATARM–26-May-09
Section 6
Errata
6.1 JTAGSEL S5 Footprint Selector
For JTAG selection, the S5 footprint must never be soldered, otherwise the chip can be damaged.
By default, the JTAGSEL input pin integrates a pull-down resistor (ICE mode).
To select JTAG mode, the designer should connect the JTAGSEL input pin to VDDBU power.
6.2 External Capacitor Values on XIN and XOUT
The external capacitor values on XIN and XOUT are not correct.
The 10 pF capacitors must be replaced by 22 pF capacitors.
Please refer to the electrical parameters section of the datasheet.