Atmel AT91SAM9G10-EK, User Manual

Page: 15 / 39

AT91SAM9G10-EK Evaluation Board User Guide 3-3
6479A–ATARM–26-May-09
– Support for ISO7816 T0/T1 Smart Card, Hardware and Software Handshaking, RS485 Support
„ Two Master/Slave Serial Peripheral Interface (SPI)
– 8- to 16-bit Programmable Data Length, Four External Peripheral Chip Selects
„ One Three-channel 16-bit Timer/Counters (TC)
– Three External Clock Inputs, Two multi-purpose I/O Pins per Channel
– Double PWM Generation, Capture/Waveform Mode, Up/Down Capability
„ Two-wire Interface (TWI)
– Master Mode Support, All Two-wire Atmel EEPROMs Supported
„ IEEE
®
1149.1 JTAG Boundary Scan on All Digital Pins
„ Required Power Supplies:
– 1.08V to 1.32V for VDDCORE and VDDBU
– 3.0V to 3.6V for VDDOSC and for VDDPLL
– 2.7V to 3.6V for VDDIOP (Peripheral I/Os)
– 1.65V to 1.95V and 3.0V to 3.6V for VDDIOM (Memory I/Os)
„ Available in a 217-ball LFBGA RoHS-compliant Package