Atmel AT91EB40A, User Manual

Page: 25 / 41

AT91EB40A Evaluation Board User Guide 6-1
Rev. 2635C–ATARM–13-May-05
Section 6
Appendix B – Schematics
6.1 Schematics
The following schematics are appended:
!
Figure 6-1. PCB Layout
!
Figure 6-2. SRAM Memory Devices and Two-wire Interface Memory
!
Figure 6-3. Push Buttons, LEDs and Serial Interface
!
Figure 6-4. Reset and JTAG Interface
!
Figure 6-5. AT91R40008
!
Figure 6-6. I/O and EBI Expansion Connectors
!
Figure 6-7. Power Supply
!
Figure 6-8. Flash Memory Devices
The pin connectors are indicated on the schematics:
!
P1 = EBI Expansion Connector (Figure 6-6)
!
P2 = I/O Expansion Connector (Figure 6-6)
!
P3 = Serial A (Figure 6-3)
!
P4 = Serial B (Figure 6-3)
!
P5 = JTAG Interface (Figure 6-4)