31
32166A–AVR32806–06/11
Atmel AVR32806
Devices delivered with version 1.1.1
:
•
Atmel AVR UC3 C, rev. D and higher
Known bugs and limitations
: The frequency detection feature does not integrate the
excursion of the RCSYS (±3%).
8.1.5 Version 1.1.0 - 2010/01/15
•
Optimized auto-baud implementation to save memory footprints
•
Removed serial number upon USB DFU enumeration to support USB gang-
programming from the same platform
•
Removed usage of the configuration general purpose fuse bit ISP_BOD_EN: This
implies that the BOD is not enabled by the boot loader
•
Moved usage of the configuration general purpose fuse bits ISP_IO_COND_EN and
ISP_FORCE to bits in the last word of the user page, this word being referred to as
Configuration Word1
•
Use the penultimate word of the user page to store the I/O conditions boot loader
configuration, this word being referred to as Configuration Word2
Supported devices
:
•
Atmel AVR UC3 A0, A1, rev. H and higher
•
Atmel AVR UC3 A3, rev. E and higher
•
Atmel AVR UC3 B0, B1, rev. F and higher
•
Atmel AVR UC3 C, rev. D and higher
Devices delivered with version 1.1.0
:
•
Atmel AVR UC3 C, rev. D and higher
Known bugs and limitations
: The hardware boot condition is only accessible on port A
pins.
8.1.6 Version 1.0.3 - 2009/04/08
•
Implements a more robust frequency detection algorithm, and supports 8MHz,
12MHz, and 16MHz crystals
Supported devices
:
•
Atmel AT32UC3A3, rev. E
•
Atmel AT32UC3A0/1, rev. H and higher
•
Atmel AT32UC3B0/1, rev. F and higher
Known bugs and limitations
: None.
8.1.7 Version 1.0.2 - 2008/02/28
•
A workaround for the device erratum titled “On
and
, corrupted read in flash after FLASHC WP, EP, EA, WUP, EUP
commands may happen,” has been implemented
Supported devices
:
•
Atmel AT32UC3A0/1, rev. H and higher
•
Atmel AT32UC3A3, rev. D
•
Atmel AT32UC3B, rev. F and higher
Known bugs and limitations
: On the Atmel AT32UC3A3 device, the USB enumeration
might fail.
