2
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
RONDO
EDID
INT
LEARN
PWR
SYNC
OUT 1
OUT 2
TM
DC 5V
+
-
FW
HDMI OUT
HDMI IN
AT-RON-442
4
1
2
3
EDID
RONDO
TM
LEARN
INT
POWER SYNC
DC 5V
+
-
FW
HDMI OUT
HDMI IN
AT-RON-444
5
5
6
6
7
7
8
8
3
3
3
3
1
1
2
2
Panel Descriptions
1. Power LED: Will light up when the distribution amplifier receives power
2. Sync LED: Illuminates when receiving signal from the source
3. Output LEDs: Each LED will illuminate for the corresponding connected displays
4. EDID
LEDs: LED will illuminate to indicated the current EDID mode
Button: Press to select between EDID modes
5. HDMI IN - Connect HDMI source here
6. HDMI OUT - Connect HDMI displays here
7. FW port -
Connect a Mini USB to USB A cable for updating with a computer
Note:
Firmware updates can be found at http://www.atlona.com/product/AT-RON-442 or 444
8. DC 5V port - Connect included 5V power supply here
Mounting Plate x 2
Mounting bracket x 2
The Rondo comes with mounting brackets and mounting plates. The transmitter uses the mounting
plates to be affixed to a table/desk/etc and the receiver will use the mounting brackets.
To affix the mounting plates to the unit, use the 4 screws included in the kit to connect them to
the bottom of the Rondo. Once the plates are attached, turn the unit over and mount the unit to
any surface using the oval holes in all four plates.
Larger oval
hole will be
attached to
the wall/table.
Larger oval
hole will be
attached to
the wall/table.
Mounting
Circular holes
will always be
attached to the
unit.
Circular holes
will always be
attached to the
unit.
LEARN
INT
POWER
SYNC
1
2
3
4
AT-UHD-RON-444
EDID
