AT-OMNI-521
29
Basic Operation
9. Click the
Mode
drop-down list and select
Output
.
10. Click the
Input
drop-down list and select the IP input. The selected input must not be currently in use by another
session. If the input is already in used, then an error message will be displayed. If this occurs, then select
another input.
11. Click the
SAVE
button to commit changes.
If IR signals need to be sent upstream, to the encoder, then follow the instructions under
Upstream IR Control
(page 30)
.
7. Scroll down and locate the
Serial Configuration 2
section.
8. Click the
Port
drop-down list and select
serial_port2
.