6
Installation Guide
AT-OMNI-521
1. Launch a web browser and enter the IP address of Velocity, in the address bar.
2.
Enter the required login credentials.
3. Click the
Login
button.
4. The Velocity with Integrated AMS Dashboard will be displayed.
5. Click the icon, in the upper-left corner.
6. Click
Management
>
AMS Device Manager
from the fly-out menu.
All available decoders will be displayed under the
Unassigned
category. When a decoder
is unassigned, it means that it has not been assigned to a site, building, and/or room. Refer
to the Velocity User Manual for more information on these topics.
If a DHCP server is not found within 60 seconds, the decoder will be placed in Auto IP mode
and assigned an IP address within the range of
169.254.xxx.xxx
. If this occurs, configure
the network interface of the computer that is running AMS, located on the same subnet
(
169.254.xxx.xxx
, subnet mask
255.255.0.0
). Refer to User Manual for more information.
If no OmniStream decoders are found, then verify the following:
•
The computer that is running Velocity must be on the same network as the
OmniStream device.
•
Remove any network restrictions that may be in place. In order for mDNS to function
properly, there must not be restrictions applied to the network.
Accessing devices using Velocity with Integrated AMS
