4
Installation Guide
AT-UHD-EX-100CE-RX-PSE
The AT-UHD-EX-100CE-RX-PSE includes two mounting brackets and two mounting screws,
which can be used to attach the units to any flat surface.
1. Remove the two top screws from each side of the enclosure.
2. Position one of the mounting brackets, as shown below, aligning the holes on the side of the
enclosure with one set of holes on the mounting bracket.
3. Use the enclosure screws to secure the mounting bracket to the enclosure.
4. Repeat the above steps to attach the second mounting bracket to the opposite side of the
unit.
Mounting Instructions
4. Mount the unit using the oval-shaped holes, on each mounting bracket. If using a drywall
surface, a #6 drywall screw is recommended.
NOTE:
Mounting brackets can also be inverted to mount the unit under a table
or other flat surface.
