24
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Command
Feedback
Description
CSpara[W,X,Y,Z]
CSpara[W,X,Y,Z]
Change the baud parameters of the switcher to meet control
needs
W (baud rate) = 2400, 4800, 9600, 19200, 38400, 57600, or
115200
X (data length) = 8, 9
Y (parity) = 0 (None), 1 (Odd), 2 (even)
Z (stop bit) = 1, 2
RS232paraV[W,X,Y,Z]
RS232para1[W,X,Y,Z]
Change the baud parameters of the connected receiver
V (zone #) - 1, 2, 3, 4, 5
W (baud rate) = 2400, 4800, 9600, 19200, 38400, 57600, or
115200
X (data length) = 8, 9
Y (parity) = 0 (None), 1 (Odd), 2 (even)
Z (stop bit) = 1, 2
RS232zoneX[command]
e.g.
RS232zone1[PWRO]
RS232zoneX[command]
e.g.
RS232zone1[PWRO]
Send commands to devices connected to receiver RS-232
ports
Check the user manual of controlled device for the commands
X (zone #) = 1, 2, 3, 4, 5
e.g.
Turns the power on for the device connected in zone 1
IPCFG
IP Addr : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
IP Port: x.x.x
Displays IP address configuration
IPTimeout XX
e.g.
IPTimeout120
IPTimeout XX
e.g.
IPTimeout120
Determines amount of seconds of inactivity before TCP/IP
disconnects
IPQuit
IPQuit
Logs out of TCP/IP
IPAddUser
TCP/IP username & password list:
- user password
- user password
- user password
Will display a list of users
IPAddUser X Y
TCP/IP user was added
Add a user for TCP/IP control. X=User Y=Password
Ex. IPAddUser Atlona 1234 (User=Atlona 1234=Password)
IPDelUser X
TCP/IP user was deleted
Delete a user from TCP/IP X=User (Ex. IPDelUser Atlona)
IPChangePass W X Y Z IPChangePass W X Y Z
Changes the user/admin password
w = user x = old password y = new password z = new password
e.g.
IPChangePass root Atlona abc123 abc123
IPDHCP sta
IPDHCP sta
Ex. IPDHCP on
Displays the status of DHCP
IPDHCP on
IPDHCP on
Turns DHCP on
IPDHCP off
IPDHCP off
Turns DHCP off
IPStatic X Y Z
IPStatic (address) (netmask)
(gateway)
Sets a static IP address
e.g.
IPStatic 192.168.1.1 255.255.255.0 192.168.1.200
IPPort
IPPort Y
Set the TCP/IP port (ex. IPPort 230)
IPLogin sta
IPLogin sta
e.g.
IPLogin on
Displays IPLogin status
e.g.
IPLogin is on
IPLogin on
IPLogin on
Enables IPLogin
IPLogin off
IPLogin off
Disables IPLogin
Broadcast X
Broadcast X
Displays broadcast mode X = on, off, sta
InputBroadcast X
InputBroadcast X
Displays input broadcast mode X = on, off, sta
InputStatus
e.g. InputStatus
InputStatus XXXXXXXX
e.g. InputStatus 00100100
Displays which inputs are connected
(0 = not connected 1 = connected)
e.g.
Inputs 3 & 6 are connected
Zones -
1
: HDBaseT IN 6
2
: HDBaseT IN 7
3
: HDBaseT IN 8
4
: HDBaseT OUT 1
5
: HDBaseT OUT 2
