Atlona AT-UHD-CLSO-612, User Manual

Page: 25 / 35

25
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Commands
The command codes are case sensitive, do not change capitalization, spacing, or lettering.
Command Feedback Description
PWON PWON Power ON
PWOFF PWOFF Stand-by
PWSTA PWON/PWOFF Get system power status
RS232zone[X][Y] RS232zoneX[Y]
RS232zoneX[Y], X: 1-3. Y is the command sent to the HDBT
[Y] is the command string sent to the display device
RS232para[X][Y] RS232paraX[Y]
RS232paraX[baudrate,databit,parity,stopbit] X is 1-3. [Y] is the
parameter for RS232.
CSpara[Y] CSpara[Y]
Set RS232 parameter
[Y] is the parameter for RS-232.
VOL+ VOL(xx) Turns the volume up one level
VOL- VOL(xx) Turns the volume down one level
VOL(xx)
VOL(xx)
ex. VOL(10)
Turns volume to the specified level <xx: 10 ~ -80>
Read the volume current level status => VOL
Ex: Adjusts the master volume level to -23dB => VOL(-23)
MVOL+ MVOL(xx) Turns the MIC volume up one level
MVOL- MVOL(xx) Turns the MIC volume down one level
MVOL(xx)
MVOL(xx)
ex. MVOL(30) Turns MIC5V volume to the specified level <xx: 30 ~ -80>
Read the MIC5V volume current level status => MVOL
MICx [Y]
MICx [Y]
ex. MICon 20
Sets up MIC values
x = on / off / sta / atime (attack time) / rtime (background release
time) / sens (microphone sensitivity level) / reduce (background
reduce level)
[Y] = value (ex. 20)
LVOL+ LVOL(xx) Turns the Line volume up one level
LVOL- LVOL(xx) Turns the Line volume down one level
LVOL(xx)
LVOL(xx)
ex. LVOL(0) Turns Line volume to the specified level <xx: 0 ~ -80>
Read the Line volume current level status => LVOL
SnVOL+ SnVOL(xx)
Turns the Sub volume up one level <n: 1-6> (n = input number)
Ex: Adjusts the HDBT2 volume to up => S4VOL+
SnVOL- SnVOL(xx)
Turns the Sub volume down one level <n: 1-6> (n = input number)
Ex: Adjusts the VGA1 volume to down => S5VOL-
SnVOL(xx)
SnVOL(xx)
ex. S2VOL(-15)
Turns Sub volume to the specified level <n: 1-6, xx: 0 ~ -80>
(n = input number)
Read the Sub volume current level status => SnVOL
Ex: Adjusts the HDMI1 volume level to -10dB => S1VOL(-10)
VOLMute [Y] VOLMute [Y] VOLMute [on/off/sta]. Set volume to mute on. => VOLMute on
Menu[X]
Menu[X]
ex. MenuDown Sets to control OSD interface, [X]: Sw/Up/Down/Left/Right/Info.
Ex: Sets to display OSD information => MenuInfo
Lock Lock Locks the front panel
Unlock Unlock Unlocks the front panel
Version [Y]
ex. Version osd Version [Y]
ex. Version x.x.xx
Brings up the software versions: ex. Version mcu
firmware [mcu]
OSD menu [osd]
DSP [dsp]
FPGA [fpga]
Type AT-UHD-CLSO-612 Brings up the model information
Mreset Mreset Reset device to manufacture default